Bev 500 - fuel door problem

[examiner]

Tweet

Hi,

Is anyone know how open fuel door in Beverly 500 when opening transmission is broken? 

I'm new with Beverly 500 and I don't want to crash any body part, so please help me.

Marcin

[mao288]

Marcin I am sorry, but I do not understand what you mean ...
You please repeat?

[street_hawk]

gli si è rotto il cavo che comanda l'apertura dello sportellino della benzina e chiede come fare forse per aprirlo o sostituirlo

hi Marcin
To replace the cable costs about 15 € you have to disassemble the lid on the tank
To disassemble the cover remove the screws indicated through pictures and remove the entire piece, which includes the door shown in photos



We remove 4 screws from the No. 1 and 4 on sight while the 2 and 3 are under the door of supply.
The only problem you will be to have to force the door gently to access the screws 2 and 3 who are under the door 
Remove the cap of petrol and rubber seal that is at the base of the neck of the tank and pull the entire piece of plastic first from behind to slide up and then totally remove it.
Will be removed after the old cable and replace it with new and reassemble everything
Is not a difficult task to be done but requires some manual if you do not go to a service center

Don Gerry 
Excuse for the poor translation but I do not know better than google

[examiner]

The only problem you will be to have to force the door gently to access the screws 2 and 3 who are under the door 

Don Gerry - thank you very much for your answer and detailed explanation!
Yes, the only problem is "force the door gently"  but I will try 

Marcin

[mao288]

DON GERRYYYYYYYYYY!!!!!!!!!! 

[Assenzio]

oramai tutti lo conoscono come DOn GErry

 

[street_hawk]

The only problem you will be to have to force the door gently to access the screws 2 and 3 who are under the door 

Don Gerry - thank you very much for your answer and detailed explanation!
Yes, the only problem is "force the door gently"  but I will try 

Marcin

Happy to be helpful, I hope you can solve additional info as to open the door tries to pull it back through with a metal plate thickness equal to the area that remains between the door and the whole cap 
Greetings 
Don Gerry