Titolo: Bev 500 - fuel door problem Inserito da: examiner - Gennaio 09, 2008, 02:10:34 pm Hi,
Is anyone know how open fuel door in Beverly 500 when opening transmission is broken? ??? I'm new with Beverly 500 and I don't want to crash any body part, so please help me. Marcin Titolo: Re: Bev 500 - fuel door problem Inserito da: mao288 - Gennaio 09, 2008, 05:02:36 pm Marcin I am sorry, but I do not understand what you mean ...
You please repeat? Titolo: Re: Bev 500 - fuel door problem Inserito da: street_hawk - Gennaio 09, 2008, 05:34:57 pm gli si è rotto il cavo che comanda l'apertura dello sportellino della benzina e chiede come fare forse per aprirlo o sostituirlo
hi Marcin To replace the cable costs about 15 € you have to disassemble the lid on the tank To disassemble the cover remove the screws indicated through pictures and remove the entire piece, which includes the door shown in photos (http://img48.imageshack.us/img48/5901/smontaggiocoperchioserbui1.jpg) We remove 4 screws from the No. 1 and 4 on sight while the 2 and 3 are under the door of supply. The only problem you will be to have to force the door gently to access the screws 2 and 3 who are under the door :o :o Remove the cap of petrol and rubber seal that is at the base of the neck of the tank and pull the entire piece of plastic first from behind to slide up and then totally remove it. Will be removed after the old cable and replace it with new and reassemble everything Is not a difficult task to be done but requires some manual if you do not go to a service center Don Gerry ;) ;) Excuse for the poor translation but I do not know better than google Titolo: Bev 500 - fuel door problem Inserito da: examiner - Gennaio 09, 2008, 06:01:53 pm The only problem you will be to have to force the door gently to access the screws 2 and 3 who are under the door :o :o Don Gerry - thank you very much for your answer and detailed explanation! Yes, the only problem is "force the door gently" ;) but I will try :D Marcin Titolo: Re: Bev 500 - fuel door problem Inserito da: mao288 - Gennaio 09, 2008, 06:04:26 pm DON GERRYYYYYYYYYY!!!!!!!!!! ;D ;D ;D ;D ;D ;D ;D Titolo: Re: Bev 500 - fuel door problem Inserito da: Assenzio - Gennaio 09, 2008, 06:07:32 pm oramai tutti lo conoscono come DOn GErry
;D ;D ;D ;D Titolo: Re: Bev 500 - fuel door problem Inserito da: street_hawk - Gennaio 09, 2008, 06:29:21 pm The only problem you will be to have to force the door gently to access the screws 2 and 3 who are under the door :o :o Don Gerry - thank you very much for your answer and detailed explanation! Yes, the only problem is "force the door gently" ;) but I will try :D Marcin Greetings ;) ;) Don Gerry |